We are now selling the same grinder you see in our videos and use in our demo stations. They come without guards or tool rests. They're brand new and carry the Rikon 5-year warranty. We've found them to be reliable, and they work really well with our CBN wheels. Make sure you see all the options below. Our wheels are such a good value that getting a grinder with wheels still costs less than most places charge for wheels alone!
The Radius Edge: A unique feature of this wheel is the 1/4" radius on the left and right side of the wheel. The radius makes it easy to grind small 1/4" hollowing bits and round scrapers. This eliminates the problem of having to rotate a tool by the handle (in the case of scrapers) and end up over-grinding the tip. This is a very handy feature, and you can hold the small bits and not burn your fingers. You won't find a better wheel at these incredible prices. Money back guarantee.
CBN wheels will change the way you sharpen forever – Think razor sharp edges.
The 4-in-1 Design CBN Wheel has four usable features:
1) The face of the wheel is 1.25" wide for normal sharpening.
2) 1/4" radius on each side – our present best seller for sharpening hollowing tool bits and scrapers.
3) Both sides of the wheel have a 1" side face of CBN material for non-hollow grinding skews and scrapers!
4) The inside edge of the wheel has a 9mm 90 degree gap (about 1/3") space shoulder for making relief cuts or tapers on hook type scrapers or box scrapers.
These wheels are 8" in diameter and have 5/8" arbor holes
Choose any two grits you like: 80, 180, 220, 350, 600, 1000
Regular price for grinder = $139.95 + one radius edge wheel = $149.95 + one 4-in-1 Design wheel = $169.95 + $11.90 for the washers Total = $471.75
You Save $96.80 by purchasing this package
Shipping is $40 continental USA - NO INTERNATIONAL shipping on this product.
Please note: Grinders are shipped fully setup and mounted with your choice of CBN Wheel(s) and your choice of grits using spherical washer set(s). All orders with wheels mounted are tested before being sent out. Guards or tool rests do not come with the grinder as most wheels are too wide, and it's assumed the user will utilize their own tool holding jigs with this setup.
There is zero chance wheels will come apart as they are machined from one solid billet, which allows use on the face and side of wheels (Mega Square and/or 4-in-1 Design). As with all power equipment caution should be taken by the experienced operator. Operator assumes all risks. Please read instructions and caution sheet in the box on the reverse side of the lifetime warranty. – Thanks.
KJR Distributing LLC