All Products

For an alternative to our out of stock 350 grit 4-in-1 wheels, click below: 350 grit 4-in-1 wheel, special, no markings This wheel has four usable ...

Ever wish you had a grinder just for sharpening your turning tools and another for stuff like your lawnmower blades? How about this 1 hp Rikon Grin...

Available in 1.5, 2 and 3- inch disks. The over-sized 1.5 inch disk has 1.75 inch center and measures 2.125 inches from wave tip to opposite side w...

Currently available in over-sized 1.5, 2 and 3 -inch disks. The 1.5-inch oversized disk has 1.75 inch center and measures 2.125 inches from wave ti...

We've had customers ask us when we're going to come out with a 1" pad and mandrel for our Ultimate System. Well here it is – these mandrels and pad...

True 1" hook and loop sanding pad holder and mandrel. These also work with the Roloc stems or Hex Shanks. These tough little guys have 1/4 x 20 th...

We've been advertising these holders as 30 mm or about 1.18" in diameter, but in fact the factory made a mistake in their description and they are ...

We're now selling the same Rikon Grinders you see in our videos and use in our demo stations. They come without guards or tool rests. They are bra...

Bushings come in two sizes,  5/8" to 1/2" - 3/4" long, and 3/4" to 5/8" - 7/8" long. This allows our 8" wheels to be used on grinders with 1/2" and...

Currently available in oversized 1.5, 2 and 3-inch disks. Our 2-inch disk measures 2.125 inches at the center before scalloped wave edges begin and...

40 Disks Total/5 disks in each grit: 60, 80, 120, 180, 240, 320, 400, 600 Available in oversized 1, 2 and 3-inch disks. Our 2-inch disk measures 2....

These backer pads are primarily used for mesh abrasives but can be used in many applications to get the desired firmness. They are about 1/8” thick...

If you would like a little bit of extra softness on your sanding pad holders to help get into those deep contours on your bowls, then these intermi...

Ever hear the expression "sand like someone else is paying for the sandpaper?" Well that's easy to say and do if someone IS paying for the sanding ...

This is the very tough, medium soft Roloc Foam Pad Disc Holder. The holder is hook and loop to grip your 2" sanding discs. Five of these come in th...

This is the 2" mandrel that comes with the Ultimate Sanding System, and is used to hold the Roloc 2" and 3" sanding pad holders. One 2" and one 3" ...

Designed for use with an angle grinder, these holders have a 5/8 x 11 female thread to attach to most popular angle grinders. If you want to remove...

Need some extra 2" stems for your 1" mandrel or Roloc Disc Holders? This is it! (Mandrel head not included.) 1/4-20 thread 1/4" shaft  2" long

Currently available in oversized 1, 2 and 3-inch disks. Our 3-inch disk measures 3 inches at the center before scalloped wave edges begin and 3.325...

40 Disks Total/5 Disks in each grit: 60, 80, 120, 180, 240, 320, 400, 600 Currently available in oversized 1.5, 2 and 3-inch disks. Our 3-inch dis...

If you'd like a little bit of extra softness on your sanding pad holders to get into deeper contours on your bowls then these intermittent pads are...

Ever hear the expression "sand like someone else is paying for the sand paper?"  Well that's easy to say and do if someone IS paying for the sand...

This is a very tough, medium-soft Roloc Foam Pad Disc Holder. The holder is hook and loop to hold onto your 3" sanding discs. Five of these come in...

This 3" Mandrel comes with the Ultimate Sanding System and is used to hold the Roloc 3" hook and loop sanding pad holders. One 2" and one 3" Roloc ...