Products

We've been advertising these holders as 30 mm or about 1.18" in diameter, but in fact the factory made a mistake in their description and they are ...

This is the very tough, medium soft Roloc Foam Pad Disc Holder. The holder is hook and loop to grip your 2" sanding discs. Five of these come in th...

This is a very tough, medium-soft Roloc Foam Pad Disc Holder. The holder is hook and loop to hold onto your 3" sanding discs. Five of these come in...

We've had customers ask us when we're going to come out with a 1" pad and mandrel for our Ultimate System. Well here it is – these mandrels and pad...

This is the 2" mandrel that comes with the Ultimate Sanding System, and is used to hold the Roloc 2" and 3" sanding pad holders. One 2" and one 3" ...

This 3" Mandrel comes with the Ultimate Sanding System and is used to hold the Roloc 3" hook and loop sanding pad holders. One 2" and one 3" Roloc ...

True 1" hook and loop sanding pad holder and mandrel. These also work with the Roloc stems or Hex Shanks. These tough little guys have 1/4 x 20 th...

Designed for use with an angle grinder, these holders have a 5/8 x 11 female thread to attach to most popular angle grinders. If you want to remove...

Designed to use with an Angle Grinder they have a 5/8 x 11 female thread for attaching to most popular angle grinders. If you want to remove a lot ...

If you're like me, you have a half dozen sanding pad holders you paid a small fortune for sitting in a drawer somewhere because the hook and loop h...

This is a medium density pad with heavy duty hook and loop back that fits our sanding strips perfectly. We have two kinds: One has enough flex to t...

The Sanding Taco is a great idea and you will find a lot of uses for it. Basically it's a stout piece of foam covered completely with hook and loop...

Some problem grinders will create a little side to side movement in the wheel due to seating problems against the the shaft shoulder near the motor...

Bushings come in two sizes,  5/8" to 1/2" - 3/4" long, and 3/4" to 5/8" - 7/8" long. This allows our 8" wheels to be used on grinders with 1/2" and...

The WoodTurners Wonders Short Knife Sharpening Jig is designed to be used for sharpening shorter blades, such as a paring or pocket knife, on wet s...

The WoodTurners Wonders Small Work Table is a flat tool rest the allows you to sharpen a variety of tools on wet sharpeners or the Kodiak Tormek-St...

For the best results using our Orbital Sander, or any pneumatic tool, we recommend using this Snubber Hose. It is 1/4" tubing and has a compact swi...

Wow!  Now you can have CBN Wheels for your Tormek Grinder for LESS than the cost of stone wheels!  THIS IS HUGE! Just think about it: No dressing ...

WOW – Talk about a breakthrough!  We did some serious negotiating resulting in a giant leap improvement of our 8" Spartan CBN wheels. These wheels ...

The Spartan Plus is like our 1 inch wheel, but seriously beefed up! It is a full 1.5" wide with 1/4" down the sides. This is a fairly popular style...

The SR 221 pre-filter is a non-classified filter media designed to capture coarse and larger particles while extending the life of the particulate ...

O-ring for hose.

Due to the nature of respirator products, we cannot take returns of open respirators. The SR 500 system is a belt mounted Powered Air-Purifying Res...

Replacement battery for SR 500 fan unit.