Lathe Attachments

Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely ...

The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the ...

Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely ...

The Vicmarc® VM150 Dual-Action Mega Chuck was designed from the ground up to be the strongest, most secure chucking system in the world for large c...

The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of ...

Dovetail Jaws have been designed to mount bowls by expanding into a recess or clamping onto a spigot.  The sizes indicated on the drawing are when ...

The VM150 has two actions, one to quickly open and close the chuck as though it was lever operated (fully opens within 3 revolutions), the other to...

The VL300 Swing Away Tailstock System is ideal for turners who frequently remove the tailstock from the bed. By being able to swing the tailstock o...

Dovetail Jaws have been designed to mount bowls by expanding into a recess or clamping onto a spigot.  The sizes indicated on the drawing are when ...

Increases the reach of tool rests for turning surfaces not possible with standard tool rest.  Has 1" post and hole, with 7-1/2" reach.

Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot.The sizes indicated on the drawing show th...

The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the ...

Please note: Some sizes are made to order and will take 3-4 weeks.  Common sizes are usually in stock. This product is fulfilled by Robust and will...

500mm Extension Bed can be attached to the lathe with no support leg.  All current VL300 lathe models accept an extension bed at either end of the ...

The VL240 Swing Away Tailstock System is ideal for turners who frequently remove the tailstock from the bed. By being able to swing the tailstock o...

500mm Extension Bed for the Vicmarc VL240 Lathe. Ideal for turning between centers.

The VL240 ASM Heavy Duty Lathe has a swivel head feature which allows for the headstock to turn its normal straight position (see photo above) out ...

Standard Jaws are supplied with the chuck, but also available to purchase separately. The sizes indicated on the drawing are when the jaws form a p...

The Vicmarc Outboard turning attachment is designed to facilitate large diameter turning and is mounted to the outboard end of the lathe. It will f...