New products

Now spindle turners can experience the benefit of our Wonder Weave Mesh Sanding Strips. These large sheets are 2.75" wide and 7.75" long with a hoo...

This lamp mounting accessory was made for the Lathe Track Rack System and is used to mount five of the lamps we carry: the Quasar, the Super Nova, ...

Our proprietary Lathe Track Base is at the heart of our Lathe Track Rack System. The Lathe Track Base is a 1" square, 11 gauge tube that's milled f...

40 Disks Total/5 of each grit: 60, 80, 120, 180, 240, 320, 400, 600 These hook and loop discs not only have coated aluminum oxide, but they also ha...

2" Sample Pack of our Purple Power Sanding Discs -  consists of 5 of each grit: 60, 80, 120, 180, 240, 320, 400 and 600 = 40 total discs.     Thes...

These are like the other threaded adapters we sell – but this one has 1/4 - 20 thread on both ends. We created these adapters for folks who want to...

This wheel is for customers who are not concerned about having a radius edge, it offers more flat area on both the surface and sides than any of ou...

Our magnetic base lamps have terrific magnets with a break-away force up to 260 pounds – but what if you want to put your lamp on a wooden bench or...

Ever wish you had a grinder just for sharpening your turning tools and another for stuff like your lawnmower blades? How about this 1 hp Rikon Grin...

We're now selling the same Rikon Grinders you see in our videos and use in our demo stations. They come without guards or tool rests. They are bra...

Our redesigned Constellation Clamp Lamp now allows you to change the color temperature!  It is also dimmable! There is dimming knob on the back of ...

Four usable functions: Overall width of the wheel is 1.25" wide for normal sharpening 1/4" radius on each side for sharpening hollowing tool bi...

This wheel works with Baldor Grinders Diameter = 7" Arbor hole = 5/8" Wheel width = 1.5" CBN (cubic boron nitride) grinding wheels are State-of-...

This wheel works with Baldor Grinders Diameter = 8" Arbor hole = 3/4" Wheel width = 1.5" CBN (cubic boron nitride) grinding wheels are State-of-...

Designed to use with an Angle Grinder they have a 5/8 x 11 female thread for attaching to most popular angle grinders. If you want to remove a lot ...

Designed for use with an angle grinder, these holders have a 5/8 x 11 female thread to attach to most popular angle grinders. If you want to remove...

Introducing WoodTurners Wonders newest hone. This hone has been requested over and over again by our customers. It's now finally available at a pri...

Diamond Hones are good for touching up your tools and are more economical than CBN hones. They are preferred for sharpening carbide and these are e...

The Sanding Taco is a great idea and you will find a lot of uses for it. Basically it's a stout piece of foam covered completely with hook and loop...

Ever hear the expression "sand like someone else is paying for the sand paper?"  Well that's easy to say and do if someone IS paying for the sand...

Ever hear the expression "sand like someone else is paying for the sandpaper?" Well that's easy to say and do if someone IS paying for the sanding ...

This is a medium density, 3" foam, hook and loop sanding pad holder. It's great for hand sanding or to use for finishing on the lathe. You'll appre...

These CBN Hand Hones are for sharpening plane blades and are made for woodworkers. 1/4" thick steel plate 2.75" x 8" covered with CBN  material - ...

Made from aluminum – they will not rust Holes accept #10 screws or tap ¼” - 20 Fits 3 sizes of standard jaws in dovetail rings, or 1” - 8 spindle ...