Products under $50

Protective film for hard hat SR 580 Can be used in multiples.

Some Grinders can be a little tricky to set up, or extra washers are needed to allow the nut to reach the wheel because the thread length on the s...

Ever wished you had a backer pad that would excel in getting into corners?  Well now you do.  These are our new radius edge backer that fit right o...

Some Grinders can be a little tricky to set up, or extra washers are needed to allow the nut to reach the wheel because the thread length on the s...

Protective film for face shield SR 540

Ever hear the expression "sand like someone else is paying for the sandpaper?" Well that's easy to say and do if someone IS paying for the sanding ...

These premium discs come in over-sized 1” (1.75”), over-sized 2” (2.375”), and over-sized 3” (3.375”) – grits up to 800. Remover-Smoother discs hav...

The SR 221 pre-filter is a non-classified filter media designed to capture coarse and larger particles while extending the life of the particulate ...

These premium discs come in over-sized 1” (1.75”), over-sized 2” (2.375”), and over-sized 3” (3.375”) – grits up to 800. These Remover-Smoother dis...

Introducing the Tapered Tuffy 2" tapered hook and loop, sanding pad holder mandrel stem - a Chris Ramsey favorite. These mandrel stems have machine...

The Sanding Taco is a great idea and you will find a lot of uses for it. Basically it's a stout piece of foam covered completely with hook and loop...

True 1" hook and loop sanding pad holder and mandrel. These also work with the Roloc stems or Hex Shanks. These tough little guys have 1/4 x 20 th...

Now spindle turners can experience the benefit of our Wonder Weave Mesh Sanding Strips. These large sheets are 2.75" wide and 7.75" long with a hoo...

We've been advertising these holders as 30 mm or about 1.18" in diameter, but in fact the factory made a mistake in their description and they are ...

If you'd like a little bit of extra softness on your sanding pad holders to get into deeper contours on your bowls then these intermittent pads are...

Ever hear the expression "sand like someone else is paying for the sandpaper?" Well that's easy to say and do if someone IS paying for the sanding ...

Protective film for face shield SR 570

Pre-filter holder secures and protects the filter against handling damage.

If you would like a little bit of extra softness on your sanding pad holders to help get into those deep contours on your bowls, then these intermi...

These backer pads are primarily used for mesh abrasives but can be used in many applications to get the desired firmness. They are about 1/8” thick...

These are like the other threaded adapters we sell – but this one has 1/4 - 20 thread on one end and a 5/16 - 24 thread on the other. These adapter...

Threaded Adapters make it possible to use your Orbital Sander with all our heavy duty sanding backer pads. Adapters are 5/16 - 24 x M6 x 1 and fit ...

These are like the other threaded adapters we sell – but this one has 1/4 - 20 thread on both ends. We created these adapters for folks who want to...

Fits our 1" mandrel heads. Can be used with the Turner Turbo Inertia Sander If using with the Inertia Sander, this product will work best if the...