Sharpening Products

WOW – Talk about a breakthrough!  We did some serious negotiating resulting in a giant leap improvement of our 8" Spartan CBN wheels. These wheels ...

Diameter = 8" Arbor hole = 5/8" Wheel width = 1.5" CBN (cubic boron nitride) grinding wheels are State-of-the-Art for grinding high-speed steel ...

This wheel has four usable features: The face of the wheel is 1.25" wide for normal sharpening. 1/4" radius on each side for sharpening hollowing ...

This wheel is for customers who are not concerned about having a radius edge, it offers more flat area on both the surface and sides than any of ou...

Wow!  Now you can have CBN Wheels for your Tormek Grinder for LESS than the cost of stone wheels!  THIS IS HUGE! Just think about it: No dressing ...

These 6" wheels are for our turning friends with smaller grinders. They are made with the same radius profile as our 8" wheels. They are 1.5" wide ...

These 6" wheels are for our turning friends with smaller grinders. They are made with the same profile as our 8" Mega Square wheels. They are 1.5" ...

This wheel works with Baldor Grinders Diameter = 7" Arbor hole = 5/8" Wheel width = 1.5" CBN (cubic boron nitride) grinding wheels are State-of-...

Four usable functions: Overall width of the wheel is 1.25" wide for normal sharpening 1/4" radius on each side for sharpening hollowing tool bi...

This wheel works with Baldor Grinders Diameter = 8" Arbor hole = 3/4" Wheel width = 1.5" CBN (cubic boron nitride) grinding wheels are State-of-...

Bushings come in two sizes,  5/8" to 1/2" - 3/4" long, and 3/4" to 5/8" - 7/8" long. This allows our 8" wheels to be used on grinders with 1/2" and...

1" x 5" hone - 600 grit one side and 1000 grit on the other This CBN Pocket Hone is a very handy 1” x 5” size. It has 600 grit on one side and 1000...

Introducing WoodTurners Wonders newest hone. This hone has been requested over and over again by our customers. It's now finally available at a pri...

These CBN Hand Hones are for sharpening plane blades and are made for woodworkers. 1/4" thick steel plate 2.75" x 8" covered with CBN  material - ...

Diamond Hones are good for touching up your tools and are more economical than CBN hones. They are preferred for sharpening carbide and these are e...

This unique combination hone was created at the suggestion of one of our customers and is designed more for Woodworking and carving applications. M...

We're now selling the same Rikon Grinders you see in our videos and use in our demo stations. They come without guards or tool rests. They are bra...

1/2 HP Low Speed Bench Grinder has more than enough power for small workshops and for carpenters, turners, carvers and other craftspeople working ...

Some Grinders can be a little tricky to set up, or extra washers are needed to allow the nut to reach the wheel because the thread length on the s...

The Kodiak Locking Base (right and left) Assemblies bolt either to the Kodiak Grinder Base or your work bench. They are the part that houses the sl...

This handy add-on to the Kodiak system works with our Kodiak Sharpening Jigs and other Tormek-Style sharpening accessories. This device slides righ...

 Our CBN Credit Card Hones are just what the doctor ordered to touch up your tools while turning. We have two kinds: One has 180 grit on one side a...

Many of you have asked about the best way to sharpen Carbide tools and inserts. The answer is Diamond. CBN beats diamond on all tool steels because...

Some Grinders can be a little tricky to set up, or extra washers are needed to allow the nut to reach the wheel because the thread length on the s...