Placeholder image
Skip to content

Sanding Accessories

Filters

$
$
  • Original price $ 2.00 - Original price $ 2.00
    Original price
    $ 2.00
    $ 2.00 - $ 2.00
    Current price $ 2.00

    Intermittent Hook & Loop Pad, 2-inch

    If you would like a little bit of extra softness on your sanding pad holders to help get into those deep contours on your bowls, then these intermi...

    View full details
  • Original price $ 2.75 - Original price $ 2.75
    Original price
    $ 2.75
    $ 2.75 - $ 2.75
    Current price $ 2.75

    Intermittent Hook & Loop Pad, 3-inch

    If you'd like a little bit of extra softness on your sanding pad holders to get into deeper contours on your bowls then these intermittent pads are...

    View full details
  • Original price $ 1.80 - Original price $ 4.25
    Original price
    $ 1.80 - $ 4.25
    $ 1.80 - $ 4.25
    Current price $ 1.80

    Backer Pads for Wonder Weave Sanding Disks

    These backer pads are primarily used for mesh abrasives but can be used in many applications to get the desired firmness. They are about 1/8” thick...

    View full details
  • Original price $ 11.88 - Original price $ 11.88
    Original price
    $ 11.88
    $ 11.88 - $ 11.88
    Current price $ 11.88

    Hex Shanks - Set of Three

    Hex Shanks have been in demand by many of our customers. They are used to extend the reach of our Roloc Mandrels that come with the Ultimate Sandin...

    View full details
  • Original price $ 3.95 - Original price $ 3.95
    Original price
    $ 3.95
    $ 3.95 - $ 3.95
    Current price $ 3.95

    Roloc Mandrel Stem - 1-inch (30mm)

    We've had customers ask us when we're going to come out with a 1" pad and mandrel for our Ultimate System. Well here it is – these mandrels and pad...

    View full details
  • Original price $ 6.95 - Original price $ 6.95
    Original price
    $ 6.95
    $ 6.95 - $ 6.95
    Current price $ 6.95

    Roloc Mandrel Stem, 2-inch

    This is the 2" mandrel that comes with the Ultimate Sanding System, and is used to hold the Roloc 2" and 3" sanding pad holders. One 2" and one 3" ...

    View full details
  • Original price $ 7.95 - Original price $ 7.95
    Original price
    $ 7.95
    $ 7.95 - $ 7.95
    Current price $ 7.95

    Roloc Mandrel Stem, 3-inch

    This 3" Mandrel comes with the Ultimate Sanding System and is used to hold the Roloc 3" hook and loop sanding pad holders. One 2" and one 3" Roloc ...

    View full details
  • Original price $ 0.95 - Original price $ 0.95
    Original price
    $ 0.95
    $ 0.95 - $ 0.95
    Current price $ 0.95

    Mandrel Stem 2", 1/4" Shaft

    Need some extra 2" stems for your 1" mandrel or Roloc Disc Holders? This is it! (Mandrel head not included.) 1/4-20 thread 1/4" shaft  2" long

  • Original price $ 1.75 - Original price $ 1.75
    Original price
    $ 1.75
    $ 1.75 - $ 1.75
    Current price $ 1.75

    Threaded Adapter - 1/4 - 20 x 1/4 - 20

    These are like the other threaded adapters we sell – but this one has 1/4 - 20 thread on both ends. We created these adapters for folks who want to...

    View full details
  • Original price $ 1.75 - Original price $ 1.75
    Original price
    $ 1.75
    $ 1.75 - $ 1.75
    Current price $ 1.75

    Threaded Adapter - 5/16 -24 x 1/4 - 20

    These are like the other threaded adapters we sell – but this one has 1/4 - 20 thread on one end and a 5/16 - 24 thread on the other. These adapter...

    View full details
  • Original price $ 1.75 - Original price $ 1.75
    Original price
    $ 1.75
    $ 1.75 - $ 1.75
    Current price $ 1.75

    Threaded Adapter - 5/16 - 24 x M6

    Threaded Adapters make it possible to use your Orbital Sander with all our heavy duty sanding backer pads. Adapters are 5/16 - 24 x M6 x 1 and fit ...

    View full details
  • Original price $ 1.75 - Original price $ 2.25
    Original price $ 1.75 - Original price $ 2.25
    Original price $ 1.75
    $ 0.95 - $ 1.25
    $ 0.95 - $ 1.25
    Current price $ 0.95

    Conversion Backer Pad

    Do you have sticky back sanding discs you would like to use with your hook and loop backers?  Now you can. These are tough 3 and 2  inch backers wi...

    View full details
  • Original price $ 0.95 - Original price $ 0.95
    Original price
    $ 0.95
    $ 0.95 - $ 0.95
    Current price $ 0.95

    Mandrel Stem 2", M6 Shaft

    Fits our 1" mandrel heads. Can be used with the Turner Turbo Inertia Sander If using with the Inertia Sander, this product will work best if the...

    View full details
  • Original price $ 5.95 - Original price $ 5.95
    Original price
    $ 5.95
    $ 5.95 - $ 5.95
    Current price $ 5.95

    Heavy Duty Sanding Pad Holder Mandrel, 2-inch

    This holder/mandrel is the same as in our Heavy Duty Sanding Pad Holder Kit. They are high quality, solid build, low cost mandrels that really take...

    View full details
  • Original price $ 6.95 - Original price $ 6.95
    Original price
    $ 6.95
    $ 6.95 - $ 6.95
    Current price $ 6.95

    Heavy Duty Sanding Pad Holder Mandrel, 3-inch

    This holder/mandrel is the same as in our Heavy Duty Sanding Pad Holder Kit. They are high quality, low cost mandrels that really take a beating. N...

    View full details
  • Original price $ 3.00 - Original price $ 3.00
    Original price
    $ 3.00
    $ 3.00 - $ 3.00
    Current price $ 3.00

    Sanding Pad Holder and Mandrel, 1-inch

    True 1" hook and loop sanding pad holder and mandrel. These also work with the Roloc stems or Hex Shanks. These tough little guys have 1/4 x 20 th...

    View full details
  • Original price $ 26.88
    Original price $ 26.88 - Original price $ 26.88
    Original price $ 26.88
    Current price $ 15.88
    $ 15.88 - $ 15.88
    Current price $ 15.88

    Hex Shank Mandrel Kit

    If you agree that a choice of depth length options for sanding in deep, tight areas would be great – this is the kit for you. You will get three 1"...

    View full details
  • Original price $ 9.95 - Original price $ 9.95
    Original price
    $ 9.95
    $ 9.95 - $ 9.95
    Current price $ 9.95

    Mandrel Heads 1-inch - pkg of 3

    Want to save a bundle on the 1" mandrels? Do you have the shafts for the pad but the pad is worn out? No problem, because now you can get a package...

    View full details
  • Original price $ 8.95 - Original price $ 8.95
    Original price
    $ 8.95
    $ 8.95 - $ 8.95
    Current price $ 8.95

    Sanding Pad Holder Repair Discs

    If you're like me, you have a half dozen sanding pad holders you paid a small fortune for sitting in a drawer somewhere because the hook and loop h...

    View full details
  • Original price $ 0.00 - Original price $ 0.00
    Original price $ 0.00
    $ 7.00
    $ 7.00 - $ 7.00
    Current price $ 7.00

    Handy Hand Sander, 3"

    This is a medium density, 3" foam, hook and loop sanding pad holder. It's great for hand sanding or to use for finishing on the lathe. You'll appre...

    View full details
  • Original price $ 0.00 - Original price $ 0.00
    Original price $ 0.00
    $ 4.95
    $ 4.95 - $ 4.95
    Current price $ 4.95

    Handy Hand Sander, 2"

    These sturdy little foam holders have a tough 2" hook and loop backing and will hold any sized pad.  It is 2" high with a slightly crowned top so i...

    View full details
  • Original price $ 3.00 - Original price $ 3.00
    Original price
    $ 3.00
    $ 3.00 - $ 3.00
    Current price $ 3.00

    Tapered Tuffy 2" Sanding Mandrel

    Introducing the Tapered Tuffy 2" tapered hook and loop, sanding pad holder mandrel stem - a Chris Ramsey favorite. These mandrel stems have machine...

    View full details
  • Original price $ 3.95 - Original price $ 3.95
    Original price
    $ 3.95
    $ 3.95 - $ 3.95
    Current price $ 3.95

    Tapered Tuffy 3" Sanding Mandrel

    Introducing the Tapered Tuffy 3" tapered hook and loop, sanding pad holder mandrel stem- a Chris Ramsey favorite. These mandrels have machined shan...

    View full details
  • Original price $ 5.95 - Original price $ 5.95
    Original price
    $ 5.95
    $ 5.95 - $ 5.95
    Current price $ 5.95

    Sanding Pad Holder for Angle Grinders, 2-inch

    Designed for use with an angle grinder, these holders have a 5/8 x 11 female thread to attach to most popular angle grinders. If you want to remove...

    View full details